|

How to Fix A 3D Printer Printing Walls Too Thin

A 3D printer is complex machinery, to say the least. Involving many processes and several components, various issues could prove to be bothersome to the user. One of these is a 3D printer printing unacceptably thin, but this article is going to show you how to get rid of this nuisance. To fix a 3D…

|

How to Level Your 3D Printer Bed – Nozzle Height Calibration

Leveling your bed isn’t a hard task at all, having done it many times, but I can definitely say it’s a tedious activity to get right. I’m sure many of you have run into trouble while trying to calibrate or level your 3D printer bed, so this article will try to help you get it…

White Banding Bunny - 3D Printerly
|

5 Ways How to Fix Z Banding/Ribbing – Ender 3 & More

Most 3D printer users have experienced Z banding or ribbing issues at some point in their 3D printing journey, same with me. I wondered though, how do we fix this Z banding issue, and are there simple fixes out there? The best way to fix Z banding in your 3D printer is to replace your…

|

8 Ways How to Fix 3D Printing Layers Not Sticking Together (Adhesion)

If you want a strong, reliable 3D printed part, layer adhesion and proper bonding is needed. Without this, you are likely to experience layer separation, splitting or delamination of your parts, or in simple terms, layers not sticking together. Getting your layers to stick together in your 3D prints is important for getting a successful…

Quality Differences from Belt Tension
|

3D Print Walls Not Smooth – How to Fix

Everyone has a time when prints are going perfect, but what about when there are imperfections. I’ve experienced 3D printed walls not being smooth and I’m sure many of you out there have as well, so this article will address how to fix this issue. The best way to fix 3D printed walls that are…

3D Print Perimeters Not Touching - 3D Printerly
|

How to Fix 3D Printing Perimeters Not Touching

There are many possible issues that happen with 3D printing. One frustrating problem that I’ve had is when your perimeters or walls are not touching or there is a perimeter gap due to them not bonding. If you have experienced or are experiencing this problem now, this article will aim to help you prevent this…

|

Why Is My Extruder Grinding The Filament? Causes & Solutions

You may have come across issues of your extruder grinding up and stripping your filament, which results in underextrusion. That usually leads, after a while, no filament being extruded at all. This article will aim to identify the causes and give an easy-to-follow solution to stop this problem happening again. The reason your extruder is…

|

How to Fix Gaps Between Wall & Infill (Wall Separation)

You are on your way to finish your first 3D printed model, but something is not quite right with your model. The walls of your model are not fitting together with the model or worse it might be falling apart. The best way to fix gaps between walls & infill is to identify one of…

|

How to Fix An Extruder Motor That’s Vibrating But Not Turning

You’re having a problem with your extruder motor which happens to be showing signs of movement through vibrations, but its just not turning. This is an issue that many people in the 3D printing community have faced but find it hard to get a straight answer, so I’ve decided to try to do it in…