PETG can be quite tricky to 3D print, especially when the PETG filament becomes brittle or weak. I decided to write an article detailing how to fix PETG filament that becomes weak to help users out. To fix PETG filament or 3D prints that become brittle, first make sure you are using the right printing…
3D prints that start learning or don’t print straight can ruin the success of a model and will definitely reduce the dimensional accuracy. This article will take you through how to fix 3D prints that lean and don’t print straight. To fix 3D prints that are leaning or slanted, check for loose belts or pulleys…
Many users wonder if they can get access and use the maximum build volume in Cura, so they can 3D print larger objects. This article will help you answer that question so you can finally know how to. To use the maximum build volume in Cura, you want to remove your build plate adhesion settings…
Your 3D print has been running for a few hours, everything is going perfectly, until it randomly restarts mid-print. This issue plagues many 3D printer users and it can be pretty frustrating. I decided to write an article to help fix it once and for all. To fix a 3D printer that restarts, try re-uploading…
3D printers are mechanical machines that have many moving parts, which can unfortunately create grinding noises in some cases. This article will help you to understand why these noises can happen and how to fix them. To fix grinding or squeaking noises in your Y & Z axis, make sure your stepper plugs are plugged…
3D printed parts that are not fitting together can be frustrating, especially when they are required for some kind of functional design or aesthetic. This article will help you fix 3D printed parts that don’t fit together properly. To fix 3D printed parts that are not fitting together, you want to fix any under or…
It can be frustrating to experience a 3D print that keeps failing at the same point, and I’ve had something similar happen to me before. This article should help you fix the issue once and for all. To fix a 3D print failing at the same point, try re-uploading the G-Code to your SD card…
There are many possible issues that you can experience when it comes to the first layers in 3D printing, causing further problems in your models. I decided to write an article going through some common first layer problems and helping you solve them. To solve first layer problems, it’s important to have a clean, well-leveled…
3D printers like the Ender 3 can have issues with reading the SD card, making it difficult to get some 3D prints started. So, I decided to write an article to help you try and fix this issue. To fix a 3D printer not reading the SD Card, you should ensure that the file name…
PETG can be an issue when it comes to sticking to the bed properly so I decided to write an article helping people with this problem. The best methods to fix PETG not sticking to the bed is to make sure your print bed is leveled and not warped, and the surface is actually clean….