Printing with flexible filaments such as TPU and TPE can be challenging compared to rigid materials like PLA or ABS. Since they require specific settings, upgrades, or considerations, I decided to write an article on how it can be done to achieve good print results. You can 3D print with flexible filament by using a…
Achieving a smooth and flawless surface finish on 3D prints can be a bit challenging. As many people experience issues with this, I decided to write an article detailing how to improve the surface quality of your 3D prints. To improve surface finish in 3D prints, you can increase travel speed or enable ironing in…
A lot of people experience issues with Marlin PID autotune not working on their 3D printers, which is what helps maintain a stable and accurate temperature. I decided to write an article detailed different ways to fix Marlin PID autotune. To fix Marlin PID autotune not working, run Autotune in a stable environment, manually adjust…
It’s not uncommon to experience issues with your resin 3D printer printing nothing. Since many people face this problem and it’s quite frustrating as well, I decided to write an article detailing how to fix this. You can fix a resin printer printing nothing by using a good quality resin at an optimal exposure time…
A 3D printer enclosure is a useful accessory for printing with temperature-sensitive materials like ABS and PETG. It keeps the printer’s smells and noise in while keeping cold drafts out. Buying a new 3D printer enclosure is an option, but many users prefer to build or make one for themselves. I wrote this article to…
There are a lot of 3D printing enthusiasts that wonder how they can correctly print thin walls and many of them experience different issues when working with models that feature thin walls. To fix thin walls in 3D prints, you can try adjusting wall thickness, optimizing line width, or enabling the option “Print Thin Walls”…
Partial clogs happen when a blockage or obstruction occurs in the nozzle or filament path. This causes the filament to come out curly, which leads to failed prints. I decided to write this article to explain the best ways to fix this issue. To fix a 3D printer partial clog, you should perform a cold…
Many 3D printing enthusiasts wonder if they can 3D print keys to replace their lost house or padlock keys but are unsure if they can do it and how to do it. To copy a key with a 3D printer, you’ll need to first get a 3D model of the key and then prepare your…
The Anycubic Photon Mono M5s is a modern resin printer from Anycubic that brings new desired features that users have requested. It presents nice features that help contribute to a wonderful printing experience. This will be a simple review of the Photon Mono M5s 3D printer. We will be going through its features, specifications, unboxing,…
The Cones of Calibration is one of the most straightforward tests you can use to calibrate your 3D printer’s exposure time. However, despite being easy to print and read, some users have complained about the cones failing due to issues in their printing setup. To fix the Cones of Calibration failing, ensure your exposure time…