The “Retract at Layer Change” is an important feature that helps prevent unwanted oozing and stringing of the filament when the printhead moves to a new starting position is the “Retract at Layer Change.” Don’t worry if you’re unfamiliar with it; I’ll discuss how to use it in this article. To use the “Retract at…
3D print brims improve stability by attaching the object firmly to the bed. However, there are cases where the 3D print brim may fail to stick to the bed, thus leading to print failures. I will discuss some ways to fix this issue if you’ve encountered it before. To fix the 3D print brim not…
One issue that many people experience is their supports being too strong and hard to remove. This can cause issues and take a lot of time to remove, so I decided to write an article on how to fix it. To fix supports that are too strong to remove, you should adjust specific support settings…
Several factors contribute to making 3D print quality good or bad, one such thing is the properly operating 3D printer belts. 3D printer belt slipping is an issue faced by many users and this article has some tips and tricks that can help you out. To fix your 3D printer belt slipping, tighten the belts…
You might have encountered a 3D printer retraction squeak when printing objects. This is usually a high-pitched noise that can be pretty annoying. That is why I wrote this article to explain why this might happen and how to fix it. To fix squeaking noises when the 3D printer is retracting, ensure you adjust your…
Many 3D printing hobbyists want to be able to use temperature towers for optimal 3D prints but need to figure out how as the tool can be complicated for those that are just starting. To use a temperature tower for optimal 3D prints, you can either use the calibration shapes plugin in Cura or download…
Many people wonder about the print setting “Wipe While Retracting” setting, but they aren’t sure how to implement this. I’ll be going through how to use the “Wipe While Retracting” setting in this article. To use the “Wipe While Retracting” setting, simply enable the “Wipe While Retracting” setting in PrusaSlicer. You can also do this…
Shenzhen, July 10 – Creality, a leading manufacturer of 3D printers, is thrilled to announce the launch of its newest product, the K1 Max 3D Printer. With a better price and innovative features, the K1 Max aims to make high-quality 3D printing accessible to a wider audience. The K1 Max was priced at $999 when…
Supports play an important role in temporarily stabilizing prints, which reduces sagging or collapsing when you’re printing. Sometimes, it can be a bit challenging to determine when to use them. I wrote this article to explain the scenarios when you should use supports. You should use supports when printing objects with complicated designs, floating segments…
Many users wonder how to 3D print just the first layer of an object. So I decided to write an article detailing exactly how to do that in your slicer software. To 3D print only the first layer, you need to edit the G-code script of your model to stop automatically after the first layer….