Vibrations in your 3D printer is something you want to avoid since it reduces the quality and appearance of your prints. So, I decided to write an article showing people how to fix this problem. To reduce vibrations during printing, you need to reduce your printing speeds, jerk, and acceleration settings. Also, ensure that there…
In 3D printing, having the correct dimensions and height is crucial. Sometimes some people experience that their model’s height is not to scale, so I decided to write an article showing people how to fix this problem. To fix 3D prints with a height problem, check to ensure the Z axis is calibrated by aligning…
Being able to estimate the time it takes to 3D print is a cool feature in slicers like Cura, but they aren’t always accurate. I decided to write an article showing you how to fix wrong time estimates in Cura and similar slicers. To fix Cura’s wrong time estimates on your 3D printer, you have…
Custom supports in Cura sometimes go through issues that you’ll want to get fixed. I decided to write an article detailing how to fix some issues with custom supports not working, as well as when they don’t touch the model. How to Fix Custom Supports not Working in Cura Here’s how to fix Custom Support…
3D print supports is an essential part of 3D printing. Automatic support is a handy setting but with some models, it can place supports all over the print. This is an issue that many people experience and adding Custom Supports is a preferable solution. I decided to write an article detailing how to add Custom…
Lithophanes are really popular in 3D printing as they allow you to print a 3D version of any picture you want. A lithophane is a three-dimensional picture that reveals the image when the light is bright enough behind it. I wrote this article to teach users how to make lithophanes on resin 3D printers and…
The recently released (at time of writing) Elegoo Neptune 3 Pro is an upgrade from its predecessor (the Elegoo Neptune 3). It features certain improvements that were missing in the hardware of the Neptune 3 to improve its reliability, quality, and usability. At around $230, the features on this printer make it a steal for…
The hotend fan runs all the time even when the printing process is on pause. This can be annoying for a lot of users especially if the 3D printer is placed in your room and you are heading to bed. I decided to write an article answering whether your hotend fan should always be on…
Mesh bed leveling is a simple method used to correct an uneven print surface so it can be troublesome when the function stops working. That’s why I wrote this article, to teach you how to fix mesh bed leveling not working on different printers and firmware. How to Use Mesh Bed Leveling – Ender 3…
Mesh bed leveling or MLB is a straightforward method of compensating for an uneven print surface. It can be really helpful in the case of larger beds, where it is more challenging to level the bed at each point. That’s why I wrote this article, to teach you how to use mesh bed leveling on…