4 Best Heater for Resin 3D Printers
Reading Time: 11 minutes Depending on the climate where you live, 3D printing with resin may be difficult and you may need a heater. That’s why I wrote this article, to show you the best heaters for resin 3D printers.
The best resin 3D printer heater would be ceramic if you’re in a colder climate. I suggest using the Honeywell HeatBud Ceramic Space Heater. It efficiently warms your printer enclosure and it is easy to use. For more control, the Lasko MyHeat Personal Mini Heater is ideal, tailored for smaller spaces.
This is just the basic answer, keep reading to find out more about the best heaters for resin 3D printers.
Best Heater for Resin 3D Printers
These are the best heaters for resin 3D printers:
- Ceramic heaters
- Resin 3D printer heaters
- Seedling heat mats
- Fermentation belts
1. Ceramic Heaters
Ceramic heaters are known for their efficient heating capabilities and versatility. They offer controlled warmth and are well-suited for smaller spaces.
It is important to be aware that ceramic heaters often do not specify a temperature range in their product descriptions because the achieved temperature can be influenced by factors like room size, insulation, and individual preferences.
One thing to take into consideration is that higher wattage generally means higher achievable temperatures.
These are the best ceramic heaters available to be used with resin 3D printers:
- Amazon Basics 500-Watt Ceramic Small Space Personal Mini Heater
- Honeywell HeatBud Ceramic Space Heater
- Lasko MyHeat Personal Mini Space Heater
Amazon Basics 500-Watt Ceramic Small Space Personal Mini Heater
For resin 3D printer users seeking a compact solution, the Amazon Basics Ceramic Small Space Personal Mini Heater is a great choice.
- Compact personal space heater design that is small enough for tables or desktops
Prices pulled from the Amazon Product Advertising API on:
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Some of its features include:
- Efficient ceramic coils for rapid heating
- Tip-over protection for safety
- Suitable for home or office use
With its 500-Watt output, this heater can provide gentle and consistent heating to help maintain the optimal temperature for resin printing.
Its portability and compact size make it suitable for various resin 3D printer setups.
One user stated that he really recommends this heater to help with 3D printing resin when the climate is too cold.
Check out the video below for a detailed review of this heater.
Honeywell HeatBud Ceramic Space Heater
The Honeywell HeatBud Ceramic Space Heater is a reliable option for maintaining a stable temperature within your resin 3D printer enclosure.
- CERAMIC SPACE HEATER – The Honeywell UberHeat small room space heater provides powerful warmth. It features a sleek, compact design and quiet operation that makes it the ideal heater for bedrooms, living rooms, family rooms and more.
Prices pulled from the Amazon Product Advertising API on:
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Some of its features include:
- Easy one-button control
- Energy-efficient with 250 watts usage
- Fits on desks, tables, and workspaces
With two heat settings, this energy efficient ceramic heater can provide the warmth required for the resin-curing process.
Its compact design ensures it fits well within the printer’s workspace. The user-friendly controls make it easy to adjust the temperature according to your resin’s requirements.
One user really recommends the Honeywell HeatBud Ceramic Space Heater as he bought it to use with his 3D printer and had great experiences with it.
Lasko MyHeat Personal Mini Space Heater
The Lasko MyHeat Personal Mini Space Heater offers a single-speed heating option for smaller spaces.
- 【KEEPS YOU WARM AT WORK】At 200-Watts and 682 BTUs, this low wattage mini space heater is ideal for use under the desk to keep your feet and legs warm. Best of all, because it’s low wattage, it won’t keep tripping the office circuit breaker every time you turn it on
Prices pulled from the Amazon Product Advertising API on:
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Some of its features include:
- No assembly required
- 200-Watts, 682 BTUs ideal for under-desk use
- Designed to warm immediate space, not whole rooms
Its focused warmth can assist in regulating the temperature inside the resin 3D printer enclosure.
This heater is particularly useful for resin enthusiasts who require precise temperature control for successful prints.
One user, owner of a Phrozen Sonic Mini 4k, recommends this heater as it worked well for him.
He stated that he prints in his basement, where it is cold for half the year and he was having problems keeping his temperatures stable.
His solution was this heater with a budget grow tent, a thermostat, and an air filter for the resin fumes. He recommends first testing your heater without the printer running for a few days just to check if the temperature will remain stable.
Check out the video below for more tips about 3D printing resin in cold weather.
2. Resin 3D Printer Heaters
Resin 3D printer-specific heaters are tailored to the unique requirements of the resin printing process.
These are the best 3D printer heaters available on the market today:
- Chitu Systems Resin 3D Printer Mini Heater
- Filalab Resin LCD 3D Printer Heater Temperature Controller
Chitu Systems Resin 3D Printer Mini Heater
Chitu Systems offers a Chitu Resin 3D Printer Mini Heater that boasts versatile temperature control, easy installation, and quiet operation.
- Compact & Versatile: Our Mini Heating Module easily fits most 3D printers, providing a convenient solution for resin-based 3D printing enthusiasts.
Prices pulled from the Amazon Product Advertising API on:
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Some of its features include:
- Ideal for resin-based 3D printing enthusiasts
- Adjust the heating temperature from 0°C-120°C (32°F-248°F)
- Built-in overheat protection (auto-stops at 85°C)
Equipped with a high-performance fan and overheat protection, it is compatible with a wide range of 3D printers.
This heater aims to create a consistent and controlled environment to enhance the printing experience and output quality.
One user, who lives in Canada and suffers from the cold weather, stated that the Chitu Systems Resin 3D Printer Mini Heater has worked great with his Anycubic M3.
Filalab Resin LCD 3D Printer Heater Temperature Controller
The Filalab Resin LCD 3D Printer Heater Temperature Controller is designed to work seamlessly with popular LCD 3D printers such as ELEGOO, ANYCUBIC, and CREALITY.
- 【controlled and Keep temperature】This heater is design for control your resin printer ,make you can print at any environment where room temperature is less than normal 25°C / 77°F.When the temperature is lower than the set temperature, start heating; when the temperature reaches the set temperature, start fan circulation
Prices pulled from the Amazon Product Advertising API on:
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Some of its features include:
- Suitable for environments below 25°C / 77°F
- Incorporates high-precision temperature sensor (0.1°C accuracy)
- Fireproof case and premium power cord
Its heating thermostat and temperature control capabilities enable resin enthusiasts to fine-tune the printing environment, contributing to successful print outcomes.
One user stated that this heater works great and he had it running for a week straight without having any issues.
Another user said that while it takes some time to warm up, the Filalab Resin LCD 3D Printer Heater Temperature Controller works pretty well.
Check out the video below to see more information about how a heater can help with your resin 3D prints.
3. Seedling Heat Mats
Seedling heat mats offer gentle and consistent warmth, making them an interesting choice for maintaining a stable temperature in resin 3D printer enclosures.
These are the best seedling heat mats used for 3D printing:
- VIVOSUN Durable Waterproof Seedling Heat Mat (3″ x 20″)
- VIVOSUN Durable Waterproof Seedling Heat Mat (10″ x 20.75″)
VIVOSUN Durable Waterproof Seedling Heat Mat (3″ x 20″)
The VIVOSUN Durable Waterproof Seedling Heat Mat (3″ x 20″) is UL and MET-certified, ensuring safety and reliability.
- Reliable Results: The VIVOSUN professional heat mat maintains sweet-spot temperatures around 68-86℉(20-30℃), which is perfect for start seeding and cutting propagation; Made of high-quality PVC material, it is wear-resistant and durable to use
Prices pulled from the Amazon Product Advertising API on:
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Some of its features include:
- Utilizes advanced far-infrared heating technology
- Quickly heats up to 40°C (104°F) at 20-25°C (68-77°F)
- Radiates far-infrared light wave for gentle, effective heat
While primarily designed for plant germination and hydroponic systems, its gentle warmth can be utilized effectively to maintain a controlled environment within resin 3D printer enclosures. Its waterproof design adds an extra layer of protection.
One user stated that he found a lot of success warming his resin by placing the seedling heat mat on top of the printer’s lid so it wouldn’t overheat the lower area where the components are.
VIVOSUN Durable Waterproof Seedling Heat Mat (10″ x 20.75″)
Similar to the smaller version, the VIVOSUN Durable Waterproof Seedling Heat Mat (10″ x 20.75″) offers the same durability and waterproof qualities.
- Reliable Results: The VIVOSUN professional heat mat maintains sweet-spot temperatures around 68-86℉(20-30℃), which is perfect for start seeding and cutting propagation; Made of high-quality PVC material, it is wear-resistant and durable to use
Prices pulled from the Amazon Product Advertising API on:
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Some of its features include:
- Utilizes advanced far-infrared heating technology
- Quickly reaches up to 40°C (104℉) at 20-25°C (68-77°F)
- Strengthened heating film with double insulation layers
With its larger size, it can accommodate a larger resin 3D printer setup, ensuring that the curing temperature remains consistent and conducive to successful prints.
One user recommends wrapping seedling heat mats around the resin vat when you are trying to 3D print resin in a place that is too cold.
4. Fermentation Belts
Fermentation belts, initially designed for brewing and fermentation applications, have found innovative applications in the realm of resin 3D printing.
These are some of the best fermentation belts used for 3D printing:
- Brew Fermentation Heating Belt
- Propagate Pro Brewing and Fermentation Heat Mat Warmer
Brew Fermentation Heating Belt
The Brew Fermentation Heating Belt is a versatile solution that has gained popularity among homebrewing enthusiasts.
- Package contains 1-count of Brew belt fermentation heating belt
Prices pulled from the Amazon Product Advertising API on:
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Some of its features include:
- Wrap-Around Design
- Temperature range between 5 and 20°F over ambient temperature
- Temperature Control
- User-friendly
However, its adaptability extends beyond brewing, making it a great choice for resin 3D printer users.
Its gentle and uniform heating can be harnessed to create a controlled environment for resin 3D printing.
One user suggests getting fermentation belts instead of seedling heat mats as he thinks it is easier to get the resin vat to the appropriate temperature with the belts.
Propagate Pro Brewing and Fermentation Heat Mat Warmer
The Propagate Pro Brewing and Fermentation Heat Mat Warmer is another compelling option that bridges the gap between brewing and resin 3D printing.
- ★ SAFE & EFFECTIVE HEATING ★ Offers efficient heating for your kombucha brewing crock/vessel, costs only pennies a day to run. Ideal range for kombucha is between 75° and 85°F
Prices pulled from the Amazon Product Advertising API on:
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Some of its features include:
- Even heat distribution
- Maintains a constant temperature of 75-80°F up to 8 days
- Adjustable temperature
- Versatile size
This heat mat is designed to provide gentle and steady warmth to fermentation vessels, facilitating the ideal conditions for yeast activity during the brewing process.
However, its controlled heating properties also lend themselves well to resin 3D printing applications.
One user suggests supergluing the fermentation belt on the outside of the resin vat. He stated that he runs his for days without having any issues.
Check out the video below for detailed instructions on how to use a fermentation belt with the resin 3D print.
Completely useless write up.
in section 2. Resin 3D Printer Heaters, 3 of the 4 heaters mentioned are in fact the exact same heater with different branding and all the same price.
How the person that wrote this article felt this was a good thing is beyond me.
Hi Barry,
This was written by one of my writers and this must have slipped past me during the checks. I’ll delete two of the duplicates. Thanks for pointing this out.