|

How to Fix 3D Printer Filament Sticking to Nozzle – PLA, ABS, PETG

Getting melted filament stuck to your 3D printer nozzle can get quite annoying, especially since it can be hard to actually clean. Many of us have been through this annoyance, so I decided to write an article about how to fix your 3D printer filament sticking to your nozzle, whether it’s PLA, ABS, or PETG….

Fix Filament Feeder - Extruder 2
|

6 Solutions on How to Fix 3D Printer Filament Not Feeding Properly

One time, I remember trying to start off a 3D print, but my filament just wasn’t feeding through properly. It took me a while to finally figure out what was happening, why it was happening, and how to fix it. This article will detail that process and some quick solutions to help you if you…

|

6 Ways How to Fix Elephant’s Foot – Bottom of 3D Print That Looks Bad

When you 3D print an object you can’t see the bottom layer until the print is finished, where you might run into an issue of the bottom of the 3D print looking bad. This can be pretty frustrating, especially for large prints but luckily there is a solution to this problem. Whether you have an…

|

How to Fix 3D Prints That Have Vertical Lines/Banding & Wavy Lines

After finishing a fairly long 3D print, you might notice that there are strange vertical lines or banding on your models. This isn’t a usual effect with 3D printing, and it means there is some underlying problem that is creating these vertical lines on the side of your print. Luckily, there are a few simple…

|

How to Clean Your 3D Printer Nozzle & Hotend Properly

The nozzle and hotend on your 3D printer go through plenty when it comes to 3D printing, so properly cleaning them is essential. If you don’t properly clean them, you can run into quality issues and inconsistent extrusion. The best way to clean your 3D printer nozzle and hotend are to take apart the hotend…

|

How to Fix 3D Printer Not Extruding at Start

You have your 3D printer set up and ready to print, then you start the extrusion process, but nothing is extruding. This is a problem that some people experience, which is frustrating, but there are some fixes that you can try to fix this issue. The best way to fix a 3D printer not extruding…

Filament Broke Off in Extruder - 3D Printerly
|

How to Remove Broken Filament From Your 3D Printer

One of the most frustrating things in 3D printing has to be experiencing broken filament in your 3D printer’s extruder and not being able to get it out. You might have tried many solutions, but they just aren’t working. That’s the reason I wrote this article today to help you solve this problem and learn…

|

How to Fix a 3D Printer Skipping or Missing Layers

With a 3D printer, different situations can occur which can lead to your printer skipping layers. This in return negatively affects the print quality and hence results in an unsuccessful print. This article is going to aim to tackle the problem of a 3D printer skipping layers. It will guide you through why it happens…

|

How to Remove a Stuck Nozzle on Your 3D Printer – Quick Fix

There have been several people who have had their nozzle stuck in the heater block, and they just could not remove it. This is a frustrating problem as it troubles the designers and causes delays in their designing the product, but there is definitely a solution that you can try today to solve this kind…

|

5 Ways How to Fix 3D Printer Nozzle Hitting Prints or Bed

Many users had situations where their 3D printer’s nozzle keeps hitting their prints. This can be very frustrating as they end up starting the print all over, ultimately wasting filament. Even after restarting the print, they still run into the same issues because they don’t know how to fix the problem. This article will give…