Cleaning a 3D printer surface seems like such a simple task but it can be a little tougher than it seems. I’ve had trouble cleaning glass surfaces myself and searched high and low for the best solutions to do it properly, which I’ll be sharing in this post. How do you clean a glass 3D…
I’ve been thinking about 3D printing speeds and why I can’t just turn up to the maximum speed and let my 3D printer run. Many people have tried this and have seen their printing quality reduce or not the print finish at all. I decided to look into what limits the speed for 3D printing…
If you’ve wondering just which stepper motor/driver is best for your 3D printer, you’re in the right place. It’s a quite overlooked part of a 3D printer and it deserves a bit more of an informed decision rather than just sticking with what your printer came with. Many people have reported prints improving after installing…
The problem of PLA filament snapping isn’t one that goes unnoticed and it does affect many people. But the question remains, why does PLA filament snap in the first place? I’ve wondered this myself, so I decided to look into the causes and offer up some solutions too. Why does PLA filament get brittle and…
I’ve heard many stories of clicking and grinding noises coming from an extruder, but not many stories on getting them fixed. This is why I decided to make a simple-to-follow post on how to fix this noise. The best way to fix a clicking/skipping sound on your 3D printer is to do a series of…
3D printing is a fairly modern technology which has had its capabilities questioned many times over the years. Many people wonder whether 3D printers can print absolutely anything so I’ve decided to make a post on it and try to answer it as good as I can. Can a 3D printer print anything? No, 3D…
You’ve started 3D printing but you realize that prints take a lot longer than you expected. This is something that many people think about so they look for ways to speed up their 3D printer without sacrificing on print quality. I’ve looked into various methods to achieve this which I will explain in this post….
3D printing an STL file can take minutes, hours or days depending on many factors, so I wondered if I could get an estimate of the exact time and know how long my prints will take. In this post, I will explain how you can estimate printing times of any STL and the factors that…
Over time, your 3D printer bed can start to warp and bend, resulting in a product that doesn’t work in your favor. A warped 3D printer bed is something that can cause issues and decrease print quality so I decided to look around at the best solutions and put them together in this post. So…
It can be hard finding the best free 3D printing software out there from 3D modelling software, to slicers to edit and repair apps. That’s why I decided to put together a nice, easy to understand list of free 3D printing programs that are widely used in the 3D printing community. 3D Printer Slicers You…