Creality’s Ender 5 is one of the best FDM printer available out in the market. It is a well priced, affordable 3D printer that gives high quality prints.
Ender 5 gives professional quality prints in large print volumes. This is one of the bestselling FDM 3D printers within this price range. This is one of the flagship products of Creality.
You can get yourself the Creality Ender 5 from Amazon for a very competitive price, so check it out.
The Ender 5 uses dual shaft Y axis motor that is synchronized to give a very precise print. The down shift X axis allows this 3D printer to move smoothly, giving fewer failures and more successful prints for years to come.
You don’t usually get this type of quality with other 3D printers in the same price bracket.
Stable Power Supply
The Ender 5 consumes up to 350W of power. The power supply module present in Ender 5 is more advanced and stable compared to Ender 3.
With the help of this new modified power supply module, the Ender 5 can heat its print head up to a temperature of 100 degrees Celsius within just 5 minutes.
V-Shaped Wheels
Ender 5 comes with V-shaped wheels that are very stable and produces less noise. Another main advantage of this design is that it can withstand wear and tear for a very long time.
Resume Printing Function
The printer can start printing from where it stopped previously during an unexpected power outage. Many printers lack this function and you have to print the model once again from start.
Integrated Motherboard
The way this 3D printer is set up helps its efficiency. The wires are actually integrated directly into the printer’s internal controls, specifically for the circuit design, heat dissipation and device specifications. It just simplifies a sometimes complex system.
Another major advantage of the Ender 5 is that the power supply wires are integrated with the circuitry of the motherboard of the printer. This design also helps in providing a highly efficient power module which is also another feature of the Creality’s Ender 5.
Ender 5 has a thoroughly tested and high quality circuitry build inside it. The electronics inside Ender 5 is long-lasting and can go on a continuous operation of 200 hours.
Removable Magnetic Print Bed
Unlike other 3D printers, the Ender 5 has a magnetic print bed which is removable. This makes it easy for the print to be removed. It has a soft surface which allows models to have better adhesion, so you don’t need extra products to get prints to stick.
Ergonomic Leveling Design
With the Ender 5’s new leveling design, it gets much easier so you can level your bed quickly.
Simple leveling method – Large manual lathes are ergonomically designed for speed. This allows you to solve time-consuming and labor-intensive tasks.
Designed for stability and consistently great prints over time – stable Z axis with dual rails
Large build volume compared to most printers in height, but same X & Y axis to Ender 3.
Easy assembly and quick to get started printing as parts are mostly pre-assembled
High quality 3D printers with an accuracy up to 0.05mm layer heights
Quick heating due to the large power supply, up to 110°C in 5 minutes
Relatively fast 3D printer with print speeds of 180mm/sec at good quality
Easily upgradable and open source
Quiet 3D printing can be expected with the v-shaped wheels, compact build and new design
Clean wiring system and motherboard connections so you can focus on the important things
Can 3D print a wide range of materials such as PLA, ABS, Wood-fill, Copper-fill etc.
You’re getting amazing 24-hour, lifetime technical support and professional customer service
Downsides of the Ender 5
Even though the magnetic bed seems so helpful, it can be a little bit tricky to use. This is due to the fact that the magnetic print bed can lose its magnetic properties over time and can be flimsy on the build platform.
Another main disadvantage is that, loading the printing filament can be a little difficult. This is due to the design of the print head and the filament input in Ender 5.
The printer can provide a high nozzle temperature of about 260°C. This is sufficient in melting the commonly used printing plastics like PLA and ABS.
If you want to use materials that require more than this temperature, it is not possible to print.
The printer comes with an old school LCD panel to display the settings and menu. The GUI of the printer is not very interactive and the menu lacks some functions.
The print bed is leveling is done manually. There are well-built screws under the build platform that does the job.
Another major disadvantage of the printer is that the slicing software that comes with the package is an older version of the Cura software that only runs in Windows systems. This actually is available in the SD card that comes with the accessories.
If you are a beginner and want to get started in mac or Linux; you have to go to Cura’s official website Ultimaker. Different versions of Cura that runs on different operating systems are available there.
The printer weighs around 11 kg and it is a little heavy compared to many FDM 3D printers out in the market.
Specifications of the Ender 5
General Specifications
Brand:Â Creality
Model:Â Ender 5
Assembly: Pre-assembled
Software
Software: Cura
Input Format: STL
Printing Specifications
Build Volume: 220 x 220 x 300 mm
Min. Layer Height:Â 0.05 mm
Frame: Aluminum
Nozzle Quantity:Â One
Nozzle Diameter: 0.4 mm
Max. Print temperature: 260℃
Nozzle Diameter: 1.75 mm
Connectivity: SD Card, USB
XY-Axis Positioning Accuracy: n/a
Z-axis Positioning Accuracy: n/a
Voltage:Â 100-240V
Physical Dimensions
Product Weight: 11 kg
Package Weight: 12 kg
Product Size: 400 x 380 x 400 mm
Package Size: 500 x 500 x 420 mm
Things to be Considered with the Ender 5
Changing the printing materials should be done carefully.
This is due to the fact that Ender 5 does not offer a lot of printing parameters and a slight change in the given parameters can change the print model drastically.
It is often advised to do a lot of test printing on small models with the new printing material before printing the main model.
Instead of using the version of Cura slicing software provided in the accessories by Creality, download a newer version of the software from the website Ultimaker for free and use it for slicing.
This will improve the slicing speed. The version of Cura provided in the package only works with windows. This means if you are on a system running Linux, then you have to download the Cura version for Linux.
Bed levelling should be done properly. If bed levelling is not done properly, it can result in the warping of the print model. Ender 5 comes with levelling screws that provides high amount of precision.
Play with different printing speeds until you can find the optimal value. If the print speed is too high it can cause improper extrusion and other warping problems.
What Are Customers Saying About the Ender 5
This is one of the bestselling 3D printers online at a price range near $500. With an average customer rating of 4.4 on Amazon from 208 ratings, it clearly proves to be a product worth its salt.
The Ender 5 (Amazon) is also considered as Amazons choice. It also has an Amazon bestseller ranking of 62 in the category of 3D printers.
Most of the reviews on the product are mostly positive. Many customers loved the large build volume offered by the printer and found it a suitable and affordable printer for printing large units of functional parts.
Another main thing about the printer customers loved was the easiness to set up and start out of the box. Many found the user’s manual to be very explanatory with detailed pictures.
Many customers found the magnetic and removable print bed to be very useful while some found it a flimsy design, so it’s really down to preference.
A few customers found it hard to set up for different printing materials. A slight change in a printing property for a material can lead to a disastrous outcome. Some users found it difficult to set up and level the print bed, but with practice it comes natural.
Verdict of the Ender 5 – Worth Buying or Not?
This is one of the best printers to purchase under a price range of under $500. The printer gives nice print quality.
If you are looking for a printer with a large print volume, then the Ender 5 3D printer (Amazon) is a great choice for you. The printer is very beginner-friendly and easy to set up. The power consumption of the printer is a little bit higher compared to other FDM printers.
You can print with a lot of printing materials with the printer. This can be an advantage and a disadvantage at the same time for beginners.
This is due to the fact that while changing the materials, it is difficult process to get every printing setting to right to print the new printing material.
If you are familiar with the popular slicing software like Cura then this printer would be very easy to handle.
Cura is a slicer application which we import CAD models into to get ready for slicing, or in other words, to 3D print. A question that some people ask is whether we can 3D print directly from Cura. This article will answer that question, with more key information that you’d want to know. Can You…
Figuring out what the best build surface for different materials can be confusing since there are so many different types, as well as different filaments. This article should help you pick the best bed surface for different materials. Read through this article for details on the best build surfaces for materials like PLA, ABS, PETG…
PETG can be an issue when it comes to sticking to the bed properly so I decided to write an article helping people with this problem. The best methods to fix PETG not sticking to the bed is to make sure your print bed is leveled and not warped, and the surface is actually clean….
Anycubic is a game-changer in the field of 3D printing. The Shenzhen-based company has dished out a series of affordable and efficient resin 3D printers, especially the Photon series. However, with the addition of several top-notch machines, it can get quite overwhelming to decide which one should someone get. This article will focus on comparing…
Finding the best print surface for PETG 3D prints can be tough at first, but after you get the right information, you can make your 3D printing experience a lot smoother. This article will help you choose the best print surfaces for your PETG models. The best surface for PETG prints are PEI, BuildTak &…
Creality is a well-respected manufacturer of 3D printers, having a reputation behind them of creating high quality 3D printers that users around the world love. I’m pretty sure they are the biggest manufacturer out there, and I have the Ender 3 & Ender 3 V2 to vouch for the quality. Users have been asking for…
