3D printing is great for creating parts, but with some models, we might end up with broken 3D printed parts. This can be due to weak points in the models, which sometimes can’t be avoided, but what we can do is learn to fix these broken parts. You should glue broken 3D parts together with…
After you finish a 3D print, you notice some sharp lines in the middle of your 3D prints. These horizontal lines have a negative effect on the quality of your 3D print, so it’s definitely something you’d want to get rid of. There are solutions to try out to fix these strange lines. The best…
Getting melted filament stuck to your 3D printer nozzle can get quite annoying, especially since it can be hard to actually clean. Many of us have been through this annoyance, so I decided to write an article about how to fix your 3D printer filament sticking to your nozzle, whether it’s PLA, ABS, or PETG….
When it comes to 3D printers, enclosed ones are the best ones. Enclosed printers have many advantages that usual printers do not. For instance, their enclosure acts as a protective shield against dust particles. More than that, all the belts and moving parts remain untouched by hands, decreasing the risk of damage. One obvious benefit…
3D printing is a great hobby that millions of people enjoy, but we always have to focus on safety. In this case, we are talking about safety for the pets that accompany your household, which can include cats, dogs, birds, and pets in an aquarium. I decided to look into this topic in detail and…
Glow in the dark filament is a great idea to add creativity to your 3D printing art; so many people wonder about how well it works. I decided to do a good amount of research and put together my thoughts for an in-depth glow in the dark filament guide, along with other useful information. Glow…
Depending on which 3D printer you buy, it can be a fairly quick or long process to put it together. Once that’s done, we have to look for software to aid our 3D printing journey, so most people wonder what software they need for 3D printing. I’ll answer that question in this article, so hopefully,…
One time, I remember trying to start off a 3D print, but my filament just wasn’t feeding through properly. It took me a while to finally figure out what was happening, why it was happening, and how to fix it. This article will detail that process and some quick solutions to help you if you…
I was sitting here, with my 3D printer in action and thought to myself, is there a way to describe the smell of 3D printing? Most people don’t really think about this until they get a filament or resin which is quite harsh, so I set out to find out whether 3D printing smells and…
When you 3D print an object you can’t see the bottom layer until the print is finished, where you might run into an issue of the bottom of the 3D print looking bad. This can be pretty frustrating, especially for large prints but luckily there is a solution to this problem. Whether you have an…