Anycubic Photon UV 3D Printer Review – Worth Buying or Not?

Resin 3D printing used to be an expensive, confusing and intimidating field for the average person to get into, but things have definitely changed for the better. The Anycubic Photon UV 3D Printer (Amazon) is a serious contender in the resin market for a beginner to use.

Not only is it competitively priced, it delivers some serious quality which is confirmed by the thousands of current users who love their Anycubic Photon 3D printer.

If you are in the market for a resin 3D printer, I would definitely consider this one.

Don’t be put off if it’s your first 3D printer, or you have never jumped into resin 3D printing, you are in the same boat that many other people were in.

The quality increase from FDM to SLA is a huge one, so keep reading along with this review to get some good insight about whether this 3D printer is worth buying or not.

I’ll go through the features, benefits, downsides, specs, and what other people think about the Anycubic Photon.

Features of The Anycubic Photon

  • Easy To Use
  • Incredible Resolution
  • Industrial Quality
  • After-Sale Service
  • 3-Step Assembly
  • 2560 x 1440 2K HD Masking LCD
  • 25W UV LED Light Source
  • High-Quality CNC Parts
  • Air Filtration
  • Interactive Interface
  • Photon Slicer/Workshop
  • Efficient Printing
  • Extreme Precision and Detail

Check the price of the Anycubic Photon at:

Amazon Anycubic Official Store Banggood

Easy To Use

Extremely easy to use, leveling is a breeze. Software is relatively simple to use—only 4 settings far fewer settings to adjust vs. FDM printer.

Incredible Resolution

Make tiny parts with meticulous accuracy, much smoother detail, and quality than the FDM printer.

Industrial Quality

All faces have a perfect satin finish. Any curves, chamfers, or bevels are flawless. Each one of the blue bits and all of the red knobs are anodized.

After-Sale Service

All Anycubic 3D printers are backed with lifelong technical support. If you have some queries regarding the product or the software, please feel free to contact the support.

3-Step Assembly

The setup is 3 steps and super easy. It goes as follows:

  1. Assemble Build Platform
  2. Leveling the Printer
  3. Assemble Resin Vat

2560 x 1440 2K HD Masking LCD

The Anycubic Photon has XY resolution of forty-seven microns, and Z layer height down to ten microns means that it can deliver 3D printed models with fantastic detail.

25W UV LED Light Source

The 25W UV light source sits inside the printer’s stainless steel body, along with a heat sink to give uniform UV light for long periods of time.

High-Quality CNC Parts

Metal and CNC-made structures offer repeatable and consistent performance in the long run.

Air Filtration

Inner air-purification system along with activated carbon to filter bad smells and keep surrounding air clean.

Interactive Interface

The interactive interface will allow you to preview and monitor print status in real-time.

Photon Slicer/Workshop

The Anycubic Photon comes with the contemporary version of in-house designed slicer software, which gives you extraordinary user experience.

Efficient Printing

Unlike the FDM 3D printers, the Anycubic Photon can deliver high-speed printing of 20~30millimeter per hour regardless of how much of the workspace is used.

Extreme Precision and Detail

The layers are so subtle they can’t be noticed by the naked eye, which could not be imagined by traditional FDM 3D printers.

With a perfectly tuned FDM 3D printer, a serious low layer height and small nozzle, you can definitely achieve a no-layer line print, but it really takes time and effort to achieve this feat.

With a good resin 3D printer, a beginner can do this from the very beginning with little effort and knowledge about resin printing. The differences in quality are very significant!

Benefits of the Anycubic Photon

  • Easy to set up and calibrate
  • Tranquil stepper motors
  • It is simple to get the perfect first layer with the precision of BL Touch
  • Suitable for current users of 3D printers.
  • The metallic build makes it look elegant and sturdy
  • Carbon filter on some excellent air filtration
  • Excellent printing qualities combine with economic value.
  • Long-lasting parts (screws, knobs, etc.)
  • Fast shipping is offered by numerous vendors.
  • Fast printing: A regular miniature piece can be printed within 2 to 3 hours with extreme precision.

Besides, with the unique steel ball design, you only need the Z-axis to return to zero, then lock the leveling screw to start printing.


  • Resin is usually smelly and quite messy so you’ll need to take care and use protective equipment
  • Cleaning between prints can take some time
  • Resin can get fairly expensive, but prices are gradually decreasing over time
  • The instructions aren’t too clear to help for the whole printing process
  • Uses consumables that need replacing from time to time (FEP film, 2K LCD screen).
  • Anycubic support is based in China so it can take some time to get a response
  • Firmware is known to be buggy sometimes, but updates can have fix this

We witnessed some orders made from Amazon which did not leave good reviews for the product.

We found it to be true that some pieces malfunctioned, and either the bed was wrapped a bit or some other problem.

People were seriously disheartened because they had spent quite a sum of money on this and wanted a refund. But the customer care was cooperative enough to compensate them with a brand new and working unit.

You’ll have a fantastic experience with this 3D printer with the simple installation process and high-end upgrades to make your 3D printing life easier for most people.

Specifications of the Anycubic Photon

  • Printing Technology: LCD-based SLA 3D printer
  • Light Source: UV integrated light (wavelength 405μm)
  • XY DPI: 47μm (2560*1440)
  • Y-Axis Resolution: 1.25μm
  • Layer Resolution: 25 ~ 100μm
  • Printing Speed: 20mm/h
  • Rated Power: 40W
  • Printer Size: 220 x 200 x 400mm
  • Printing Volume: 115 x 65 x 155mm (4.52″*2.56″*6.1″)
  • Gross Weight: 9.5KG

What Comes With The Anycubic Photon?

  • Anycubic Photon 3D Printer
  • Power Cord
  • Power Supply
  • Scraper
  • Tool Kit
  • Rubber Gloves
  • Mask
  • FEP Film
  • Resin
  • USB Memory Card

Customer Reviews on the Anycubic Photon

We found it astonishing that almost 90% of the people who bought from Amazon were more than satisfied with the product and recommended this to others.

One review said that this printer is a considerable step up from FDM/FFM (usually melted plastic) printers. It’s important to take your time when getting your 3D printer ready and prepped if you want to have a good experience.

There is a large Facebook group full of Anycubic Photon owners willing to give advice and help you troubleshoot any issues. The printer comes assembled and isn’t challenging to level once you understand the process.

Prints can sometimes take a while with the Anycubic Photon, the same with most 3D printers, so you can set your printer off and come back after a day out to a beautiful 3D printed object of high quality.

What’s cool about SLA printing is that you can print a single piece or a full build platform, and it takes the same time if the layer height is kept the same.

Most of the issues that come about with the Anycubic Photon (Amazon) is the leveling of the printer (the feet on the bottom adjust) and leveling the build platform. Iit should be tighter than what you’d expect and care must be taken to not crack the LCD screen.

The tension of the FEP film at the bottom of the resin vat should be tight and should feel like a sturdy surface.

Another reviewer said that the resin can get messy, often smelly, and you’ll be trading your time for the fantastic quality of prints. There are some other items you’ll need before you shall begin printing.

You need loads of paper towels, high concentration isopropyl alcohol (isopropanol) – 90-99%, small cutting pliers for removing supports, 190-micron cone filters so you can filter the resin for re-use, and if you want to: a UV light, plastic or some aluminum containers can also prove helpful.

The reviewer recommended that some videos of people printing should be seen to understand the processes. They also said that you need to make sure you’re prepared with all the necessary items before you start.

Cleaning between prints can take some time, so don’t be impatient. Unsupported islands and other operator errors can cause problems such as cured resin can get stuck to some FEP film.

You need to understand what these are before you can start with printing. You should check your photon files with any photon File Validator.

Resin is costly, but there are several tutorials to help you, hollow models, before printing. Try not to make the mistake he made and order a bunch of dull resin to print some gray-scale prints.


The Anycubic Photon is an amazing resin 3D printer that really incorporates the worry of them being too expensive, by manufacturing a high quality, sturdy machine that is well priced.

It has a whole host of features that make your 3D printing life easier, as well as looking professional. The carbon filters do a good job filtering out those smells that are quite familiar with resin 3D printers, but you should also have extra ventilation going on.

Check the price of the Anycubic Photon at:

Amazon Anycubic Official Store Banggood

I would definitely recommend getting yourself the Anycubic Photon from Amazon today if you have been thinking about getting into resin 3D printing, or if you need an addition to your current arsenal of resin 3D printers.

Recent Posts