7 Best 3D Printers for Legos/Lego Bricks & Toys

3D printing has been getting a lot of attention lately. People are beginning to discover new possibilities for it in medicine, industry, etc. But amid all this serious talk, let’s not forget the simple pleasures that drew us to it in the first place.

One of these pleasures is toy making. For most hobbyists, making models and toys served as their first introduction to 3D printing. If you have kids, you can also help assist in their creative journey with a 3D printer.

They can even help you design their own toys which you can create in real-time.

So in this article, I’ve brought you a list of some of the best 3D printers for printing toys. I also put together a list of tips and tricks to make the printing process go smoothly.

Let’s dive into the list now.

Table of Contents Show

1. Creality Ender 3 V2

Taking its rightful place at the top of the list is a new version of an old favorite, The Creality Ender 3 V2. The Ender 3 is one of the 3D printers universally admired for its insane value and ease of use. It is suitable for both beginners and hobbyists.

Let’s see what new features it’s packing in this new V2 version.

Features of the Ender 3 V2

  • Heated Print Bed
  • Carborundum Coated Build Plate
  • Print Resume Capabilities.
  • Silent Motherboard
  • Filament Run-out Sensor
  • Meanwell Power Supply
  • Integrated Storage Compartment

Specifications of the Ender 3 V2

  • Build Volume: 220 x 220 x 250mm
  • Max. Printing Speed: 180mm/s
  • Layer Height/Print Resolution: 0.1mm
  • Maximum Extruder Temperature: 255°C
  • Maximum Bed Temperature: 100°C
  • Filament Diameter: 1.75mm
  • Nozzle Diameter: 0.4mm
  • Extruder: Single
  • Connectivity: MicroSD card, USB.
  • Bed Levelling: Manual
  • Build Area: Open
  • Compatible Printing Materials: PLA, ABS, TPU, PETG

The construction of the Ender 3 is simple but stable. Twin aluminum extrusions rise out from the base for mounting and supporting the extruder assembly. The square base is also made out of the same aluminum material.

The base of the Ender 3 V2 is also different from that of the other versions. It contains all the wiring and power supply packed into it. It also comes with a new storage compartment for storing tools.

Perched on the base is a heated glass print bed. The glass print bed is coated with a Carbon Silicon compound to enhance first layer adhesion.

For controlling the printer, there is a control brick separate from the printer’s base. It consists of an LCD screen with a scroll wheel. Also, for connectivity, the printer comes with both USB A and MicroSD card support.

At the top of the printer, we have the extruder assembly mounted on a stable V-guide rail pulley. This gives the printer extra stability and precision on its dual-rail support.

The extruder is a plastic extruder that can still reach temperatures of 255°C. This feature combined with the heated print bed means you can make Lego bricks out of a wide variety of materials like ABS, TPU, etc.

I’d recommend using an enclosure with the Ender 3 V2 if you are going to print with ABS filament. It’s not required, but you can get better results by printing within a warmer environment.

The Creality Fireproof & Dustproof Enclosure from Amazon is a great one to go with, that many users find very useful.

User Experience of the Ender 3 V2

The Ender 3 comes disassembled in the box. It can take quite a bit of time to install. With the online resources available, everything should go smoothly. You can even turn it into a teachable moment for your kids.

Bed leveling is manual on the Ender 3 V2. You can also choose to use the software-assisted bed leveling system which moves your print head to the corners so you can level it a little easier.

Filament loading is also a bit difficult with the new feed system.

On the software side, you can use Cura to slice your prints comfortably without any issues. Also, the USB A and SD card slots work well when transferring the data.

The LCD screen’s UI and the scroll wheel can be a bit oversensitive. Though, once you use it for a while, you’ll get used to it.

Firmware features like the print resume capability and the silent printing work well. However, it has no Thermal runaway protection. So, it isn’t advisable to leave it operating overnight on long prints.

The printing operation is very good. The rapid heating print bed gives a good bottom finish and detaches easily from the print.

The new Z-axis design also gives the extruder additional stability churning out finely detailed Legos.

Pros of the Ender 3 V2

  • Rapid heating build plate
  • Easy to use
  • Relatively inexpensive

Cons of the Ender 3 V2

  • Open build space
  • No thermal runaway protection
  • No touchscreen controls on the display

Final Thoughts

The Ender 3 V2 might not be as flashy as some high-end models, but it delivers more than its worth. For a budget introduction to 3D printing, you really can’t so much better than it.

Get yourself the Ender 3 V2 from Amazon today.

2. Artillery Sidewinder X1 V4

The Sidewinder X1 is a relatively new mid-ranger currently trying to break into the crowded budget market. In this V4 iteration, Artillery has spared no expense in pumping it up with premium features to dominate the market.

Let’s take a look at these features.

Features of the Artillery Sidewinder X1 V4

  • Full-Color LCD Touchscreen
  • Direct Drive Extruder
  • AC Heated Ceramic Glass Bed
  • Synchronized Dual Z-axis Guide Rails
  • Print Resume Capabilities
  • Filament Run-Out Sensor
  • Ultra-Quiet Stepper Motor Driver

Specifications of the Artillery Sidewinder X1 V4

  • Build Volume: 300 x 300 x 400mm
  • Max. Printing Speed: 150mm/s
  • Layer Height/Print Resolution: 0.1mm
  • Maximum Extruder Temperature: 265°C
  • Maximum Bed Temperature: 130°C
  • Filament Diameter: 1.75mm
  • Nozzle Diameter: 0.4mm
  • Extruder: Single
  • Connectivity: USB A, MicroSD Card
  • Bed Levelling: Manual
  • Build Area: Open
  • Compatible Printing Materials: PLA / ABS / TPU / Flexible materials

One of the main selling points of the Sidewinder X1 is its beautiful design. At the bottom is a sleek base housing all the electronics in a well-packaged unit.

From the base, two aluminum gantries rise to support the extruder assembly giving it a spare but sturdy look.

On the base, there is a full-color 3.5-inch LCD touch screen for interacting with the printer. Just above the touchscreen is a heated lattice glass build plate for the 3D prints.

The X1 supports both the MicroSD card and USB A technology for data transfer to the printer. Also, it does not come with a proprietary slicer. The user has the freedom to choose from any of the open-source options available.

One of the highlights of the X1 is its spacious print bed. It has a heated ceramic glass print bed for easy print removal. With this, you can cut down print times by spreading the Lego bricks out and printing them at once.

Going to the top of the printer, we have the filament holder and its run-out sensor. Just below it, we have a direct drive extruder and a volcano-style hotend.

This pairing can reach temperatures of up to 265°C which enables you to print Lego bricks with materials like ABS.

The high printing temperature and the hotend design make the X1 Suitable for just any material. It can print PLA, ABS, and even flexible filaments like TPU. Also, the hotend makes printing faster by delivering a high flow rate of filament.

User Experience of the Artillery Sidewinder X1 V4

The Artillery X1 comes partially assembled in the box. With just a little DIY, you can get it up and running. Although it doesn’t come with automatic bed leveling, the software-assisted mode makes leveling it a piece of cake.

Filament loading and feeding are also easy thanks to the direct drive extruder. However, you’ll need to print a new filament holder because the stock one is bad.

The well-designed colorful UI makes operating the printer fun and easy. It has helpful features and resources. For slicing prints, it’s recommended to use the Cura slicer for the best results.

Additional features like the print resume function and the filament sensor work perfectly. However, there is no Thermal runaway protection.

On the bottom, the print bed lives up to the hype. Heating times are fast, and it doesn’t stick to prints excessively. However, the heating is uneven near the extremes of the large print bed. This can cause warping on 3D models with a large surface area.

Print quality is excellent. With ABS, PLA, and TPU filaments, you’ll be able to print some very detailed toys at high speed.

Pros of the Artillery Sidewinder X1 V4

  • Large build space
  • Silent operation
  • Supported by USB and MicroSD card
  • Bright and multi-colored touchscreen
  • AC powered which leads to a quick heated bed
  • The cable organization is clean

Cons of the Artillery Sidewinder X1 V4

  • Uneven heat dissipation
  • Print wobble at height
  • The spool holder is known to be a little tricky and hard to make adjustments to
  • Doesn’t come with sample filament
  • Print bed isn’t removable

Final Thoughts

The Artillery X1 V4 offers a step-up from the basic budget printers while retaining that friendly price point. If you’re looking for that upgrade, then this is a great choice.

You can find the Artillery Sidewinder X1 V4 from Amazon for a great price.

3. Sovol SV01

The SV01 is a budget midrange 3D printer from renowned filament manufacturers Sovol. It is the company’s first attempt at producing a 3D printer. They succeeded in turning out a pretty good product.

Let’s have a look at what it provides:

Features of the Sovol SV01

  • Removable Heated Glass Build Plate
  • Meanwell Power Supply Unit
  • Direct Drive Titan-style Extruder
  • Filament Run-out Sensor
  • Print Resume Function
  • Thermal Runaway Protection

Specifications of the Sovol SV01

  • Build Volume: 240 x 280 x 300mm
  • Max. Printing Speed: 180mm/s
  • Layer Height/Print Resolution: 0.1-0.4mm
  • Maximum Extruder Temperature: 250°C
  • Maximum Bed Temperature: 120°C
  • Filament Diameter: 1.75mm
  • Nozzle Diameter: 0.4mm
  • Extruder: Single
  • Connectivity: USB A, MicroSD card
  • Bed Levelling: Manual
  • Build Area: Open
  • Compatible Printing Materials: PLA, ABS, PETG, TPU

The design of the SV01 is pretty standard open build fare. The printed bed and the extruder assembly are mounted on an Aluminum frame. The entire aluminum structure is bolted together securely, giving the frame some sturdiness.

The control interface consists of a 3.5-inch LCD screen with a scroll wheel. The screen is also placed on the printer’s frame.

For connectivity, the printer supports USB A, USB stick, and MicroSD card connection.

Sovol didn’t include a proprietary slicer in the box with the SV01. To slice your prints, you’ll have to use a third-party slicer, which usually is Cura for most 3D printer hobbyists out there.

On the bottom, the removable glass plate is made out of carbon crystal glass. The glass is also heated and can go up to temperatures of 120°C for better print removal. You can print different colored Legos with high-strength materials like ABS, thanks to the print bed.

At the top, we have a Titan-style Direct Drive extruder that can reach temperatures of up to 250°C. Also, it can handle a wide variety of materials like PLA, ABS, and PETG with ease.

User Experience of the Sovol SV01

The SV01 is already “95% pre-assembled” inside the box, so not much installation is needed. The cable management on this printer is shoddy. Sovol could’ve done more to conceal sensitive wiring.

There is no automatic bed leveling, so you’ll have to do that manually. Although, Sovol has left space for a bed sensor in case users want to upgrade.

The printer’s control panel is dull and dim. Otherwise, it does its job well. Other features like the print resume function and the filament runout detector even work well. As a plus, there is even thermal runaway protection to give users peace of mind on long prints.

During printing operations, the print bed heats up quickly thanks to the AC power supply. Prints also come off without the need for hairspray and other adhesives. It gives a great bottom finish to the Lego bricks.

Printing operation can be a bit noisy due to the dual stepper motors. But, they do a good job of keeping the Z-axis stable.

The extruder also produces a decent quality of prints for the price. The toys come out looking smooth and well-defined.

Pros of the Sovol SV01

  • Great print quality
  • Heated build plate
  • Direct drive extruder
  • Thermal runaway protection

Cons of the Sovol SV01

  • Doesn’t have the best cable management
  • Doesn’t have auto-leveling with it, but it is compatible
  • Poor filament spool positioning
  • The fan inside the case has been known to be quite loud

Final Thoughts

Although there are some misses we can chalk up to Sovol’s inexperience overall, this is still a good printer.

Check out the Sovol SV01 on Amazon today.

4. Creality CR-10S V3

Creality’s CR-10 series have been the kings of the mid-range division for a long time. With some new modern touches to the V3, Creality looks to further cement this dominance.

Features of the Creality CR-10S V3

  • Large Build Volume
  • Direct Drive Titan Extruder
  • Ultra-Quiet Motherboard
  • Print Resume Function
  • Filament Runout Detector
  • 350W Meanwell Power Supply
  • Heated Carborundum Glass Build Plate

Specifications of the Creality CR-10S V3

  • Build Volume: 300 x 300 x 400mm
  • Printing Speed: 200mm/s
  • Layer Height/Print Resolution: 0.1 – 0.4mm
  • Maximum Extruder Temperature: 270°C
  • Maximum Bed Temperature: 100°C
  • Filament Diameter: 1.75mm
  • Nozzle Diameter: 0.4mm
  • Extruder: Single
  • Connectivity: Micro USB, SD Card
  • Bed Levelling: Manual
  • Build Area: Open
  • Compatible Printing Materials: PLA / ABS / TPU / Wood/ Copper/ etc.

The CR-10S V3 retains the elegant minimalist design from the previous model. It mounts all its components on a simple but sturdy aluminum frame. On the V3, triangular supports stabilize the gantries to increase precision and stability.

On the bottom, Creality provides a heated Carborundum glass plate which has a temperature limit of 100°C. It also has a control panel “brick” separate from the main printer structure. The brick controls most of the printer’s electronics.

Like all Creality printers, the panel’s interface consists of an LCD screen and a scroll wheel. For connectivity, the CR-10S has micro USB and SD card ports.

Also, the CR-10S firmware is open source. It can be configured and modified easily. The printer doesn’t have any proprietary slicer so, you can use a third-party slicer.

The print bed of the CR-10S V3 is made out of high-quality Carborundum coated glass. A 350W Meanwell power supply heats it rapidly.

The large area of the bed and the Z-axis makes printing large toys possible. You can also print multiple Lego bricks simultaneously on its large print bed.

The all-metal Titan hotend is one of the new upgrades to the V3. The new extruder makes filament loading easier, gives it more materials to print toys with, and produces better prints.

User Experience of the Creality CR-10S V3

The CR-10S comes with some assembly required. It is not that hard to put together. For seasoned DIYers, the whole process shouldn’t take more than 30 minutes.

Loading and feeding the filament is easy, thanks to the new direct drive extruder. However, the printer comes with manual bed leveling out of the box. Although, you can change the bed leveling to automatic with a BLTouch upgrade.

The UI on the control panel is somewhat disappointing. It just lacks the punchy colors of the new LCD screens coming out nowadays. Apart from that, all the other firmware features work perfectly, and it even has Thermal Runaway protection.

Getting to the bottom, the print bed performs admirably, thanks to the rapid heating power supply. Prints also come off easily from the print bed giving the Legos that nice bottom finish.

The real star of the show-The Titan hotend doesn’t disappoint. It provides detailed toys even with the large build volume. Overall, the printer provides a great printing experience with little fuss.

Pros of the Creality CR-10S V3

  • Easy to assembly and operate
  • Large build volume
  • Titan direct drive extruder
  • Ultra-quiet printing
  • Parts pop of the print bed after cooling

Cons of the Creality CR-10S V3

  • Older style user interface
  • Bad control brick cable management.

Final Thoughts

Although the V3 didn’t come with some new features users would’ve wanted, it remains a solid force. The CR10-S V3 is still the printer to beat in the midrange section.

Check out the Creality CR10-S V3 on Amazon now, for a solid 3D printer that can print Lego bricks and toys nicely.

5. Anycubic Mega X

The Anycubic Mega X is the supersize flagship of the Mega line. It combines the best features of the Mega Line with a large build space.

Let’s take a look at some of its features.

Features of the Anycubic Mega X

  • Large Build Volume
  • Premium Build Quality
  • Print Resume Capability
  • Full-color LCD Touchscreen
  • Heated Ultrabase Print Bed
  • Filament Runout Sensor
  • Dual Z-axis Screw Rod

Features of the Anycubic Mega X

  • Build Volume: 300 x 300 x 305mm
  • Printing Speed: 100mm/s
  • Layer Height/Print Resolution: 0.5 – 0.3mm
  • Maximum Extruder Temperature: 250°C
  • Maximum Bed Temperature: 100°C
  • Filament Diameter: 1,75mm
  • Nozzle Diameter: 0.4mm
  • Extruder: Single
  • Connectivity: USB A, MicroSD card
  • Bed Levelling: Manual
  • Build Area: Open
  • Compatible Printing Materials: PLA, ABS, HIPS, Wood

The build quality of the Mega X is nothing short of amazing. It starts with a sleek base housing all the electronic components making it more compact. It then rises into two sturdy stamped steel gantries built around the base for mounting the extruder assembly.

On the front of the base, we have a full-color LCD touchscreen for interacting with the printer. It also comes with a USB A port and an SD card slot for data transfer and connections.

For slicing prints, the Mega X is compatible with several commercial 3D slicers. These include popular applications like Cura and Simplify3D.

At the heart of the print volume, we have a large Ultrabase print bed. The rapid heating print bed is made out of porous ceramic glass for easy print removal. It can reach temperatures of up to 100°C.

The Mega X has a powerful direct drive extruder. Due to its ability to reach temperatures of 250°C, it can print a wide variety of materials without hassle. We know ABS is the material of choice for printing Lego bricks, but you can experiment with materials like PETG or TPU.

The Mega X also wows in the precision department. It has dual guide rails on the X and Z-axis for added stability and accuracy. This coupled with the powerful extruder makes for some pretty high-quality toys.

User Experience of the Anycubic Mega X

The Mega X comes pre-assembled in the box, so setting it up is a breeze. There is no automatic bed leveling mode in the printer. However, you can still level the bed easily with the software-assisted mode.

The touchscreen is very responsive, and the UI’s design is bright and punchy. The UI’s menu contains many features and might be a little complex to navigate for some, but overall, it’s still a pleasant experience.

A prominent firmware feature- print resume function- is somewhat buggy. It doesn’t work well after power outages. Also, only the print nozzle has thermal runaway protection.

The print bed doesn’t have it, though this can be fixed with some changes to the firmware which you can usually find a good tutorial for.

The print bed works quite well. Prints stick to the bed well and are easily detachable. However, its temperature is capped at 90°C which means you can’t print toys out of ABS.

Printing operation on the Mega X is noisy due to the Z-axis motors. Apart from that, the Mega X produces great prints without any fuss. Although, you might need to tweak the support settings first.

Pros of the Anycubic Mega X

  • Large build volume means more freedom for bigger projects
  • Very competitive price for high quality printer
  • Improved packaging to ensure safe delivery to your door
  • Overall an easy-to-use 3D printer with features perfect for beginners
  • Great build quality
  • Direct drive extruder

Cons of the Anycubic Mega X

  • Noisy operation
  • No auto-leveling – manual leveling system
  • Low maximum temperature of the print bed
  • Buggy print resume function

Final Thoughts

The Anycubic Mega X is a pretty great machine. It delivers all its promises and more. It has definitely held up as a respected 3D printer among 3D printer enthusiasts.

You can find the Anycubic Mega X on Amazon for your 3D printing needs.

6. Creality CR-6 SE

The Creality CR-6 SE comes as a much-needed upgrade to the Creality line of printers. It brings with it some premium technology that is going to be a staple of the line in years to come.

Let’s have a look at what it has under the hood.

Features of the Creality CR-6 SE

  • Automatic Bed Leveling
  • Ultra-Quiet Operation
  • 3-Inch Touch Screen
  • 350W Meanwell Power Supply For Fast Heating
  • Tool Storage Compartment
  • Heated Carborundum Print Bed
  • Modular Nozzle Design
  • Resume Print Function
  • Portable Carry Handle
  • Dual Z Axis

Specifications of the Creality CR-6 SE

  • Build Volume: 235 x 235 x 250mm
  • Printing Speed: 80-100mm/s
  • Layer Height/Print Resolution: 0.1-0.4mm
  • Maximum Extruder Temperature: 260°C
  • Maximum Bed Temperature: 110°C
  • Filament Diameter: 1.75mm
  • Nozzle Diameter: 0.4mm
  • Extruder: Single
  • Connectivity: Micro USB, SD card
  • Bed Levelling: Automatic
  • Build Area: Open
  • Compatible Printing Materials: PLA, ABS, HIPS, Wood, TPU

The CR-6 is similar to the Ender 3 V2 in some ways. The structure consists of twin aluminum extrusions bolted onto a boxy, square base.

The similarities do not end there. Like the Ender 3 V2, the CR-6 has a storage compartment built into its base. It also houses its electronics and wiring in the base.

The similarities end at the control panel. For interacting with the printer, Creality provides a 4.3-inch color LCD touchscreen on the printer.

In keeping with recent trends, the USB A connection has been changed to a micro USB port. However, Creality still retains SD card support on the printer.

On the firmware side, the touchscreen comes with a brand-new redesigned UI for communicating with the printer. Furthermore, the CR-6 comes with a new Creality Slicer Software out of the box for slicing prints.

On the bottom, it has a rapid heating Carborundum print bed powered by a 350W Meanwell power supply. The bed can reach temperatures of up to 110°C making it suitable for filaments like ABS used in printing Lego bricks.

Perhaps, the most interesting new feature on the CR-6 is its modular hotend. All the parts in the hotend can be swapped out and replaced. So, if a part is defective or not up to the task, you can swap it out.

User Experience of the Creality CR-6 SE

The CR-6 is partially pre-assembled from the factory. All you have to do is screw in the Gantry frame to the main body, and you’re good to go. The build quality is very nice and stable.

With its new features, bed leveling and also filament feeding are equally easy. Using the touchscreen, you can easily level the print bed automatically.

On the software side, the new touchscreen is an improvement over the old scroll wheel. Operation the printer is easy, and the new UI is a big plus. It makes the printer a whole lot more accessible.

The Creality Slicer software comes packed with a new skin and the capabilities of Cura under the hood. However, it’s missing some key print profiles and can be a little bit difficult for people already used to Cura.

The heated print bed does its work well. First layer adhesion is good, and the Legos detach from it smoothly with great bottom finishes.

The print quality of the CR-6 is very decent right out of the box. With all the quality touches added to the printer, you don’t need to do much to get that superb print quality.

Pros of the Creality CR-6 SE

  • Quick assembly in just 5 minutes
  • Automatic bed leveling
  • Rapid heating bed
  • Easy to use for beginners
  • All-metal body gives stability and durability
  • Power supply is integrated underneath the build-plate unlike the Ender 3
  • Intuitive user-experience
  • Premium sturdy build
  • Great print quality

Cons of the Creality CR-6 SE

  • Glass beds do tend to be heavier and may lead to ringing in prints if not secure
  • Limited slicer software functionality
  • Doesn’t use an all-metal hotend so it can’t print some materials unless upgraded
  • Bowden extruder instead of Direct-Drive which can be either a benefit or a downside

Final Thoughts

Although it had some growing pains, the CR-6 SE has delivered on the new features it promised. If you’re looking for a budget printer with all the latest bells and whistles, this should be a good one for you.

Get yourself the Creality CR-6 SE from Amazon today.

7. Flashforge Adventurer 3

The Flashforge Adventurer 3 is an excellent beginner-friendly printer. It packs in premium features with a simple, easy-to-use design. the enclosed space makes it a safer and better option for 3D printing ABS, which Legos are made out of.

Features of the Flashforge Creator Pro

  • Enclosed Build Space
  • Built-In Wi-Fi HD Camera
  • Removable Flexible Build Plate
  • Ultra-Quiet Printing
  • Cloud and Wi-Fi Printing
  • 8-Inch Touchscreen
  • Filament Run-Out Detector

Specifications of the Flashforge Creator Pro

  • Build Volume: 150 x 150 x 150mm
  • Max. Printing Speed: 100mm/s
  • Layer Height/Print Resolution: 0.1-0.4mm
  • Maximum Extruder Temperature: 240°C
  • Maximum Bed Temperature: 100°C
  • Filament Diameter: 1.75mm
  • Nozzle Diameter: 0.4mm
  • Extruder: Single
  • Connectivity: USB, SD card, Wi-Fi, Cloud printing
  • Bed Levelling: Automatic
  • Build Area: Closed
  • Compatible Printing Materials: PLA, ABS

The Adventurer 3 is a compact desktop printer. A metal black and white frame encloses its small build space. It also has glass panels by the side to show the printing in action.

On the front of the frame is a 2.8-inch touchscreen for interacting with the printer. It also comes with a built-in 2MP camera for remotely monitoring the prints through a live stream.

On the connection side, adventurer 3 has quite a lot of options. It comes with Ethernet, USB, Wi-Fi, and Cloud printing options.

For slicing prints, Anycubic includes its proprietary Flashprint software in the box with the printer.

At the heart of the printing area, the build plate is a flexible heated magnetic plate. It is capable of printing at temperatures of up to 100°C. As a result, the printer can handle ABS and PLA models flawlessly.

Another premium feature of this printer is its hotend. The hotend is capable of reaching temperatures of 250°C.

The combo of the hotend and the heated bed make it a good choice for printing Lego bricks and other toys. Also, it has an enclosed build space which makes it child safe.

User Experience of the Flashforge Creator Pro

There is no assembly required with the Adventurer 3. The machine is pretty much plug-and-play. Bed leveling is also made easy with a new feature called the “no leveling” mechanism. It means the printer only has to be calibrated once.

The touchscreen works well, and its UI is also simple and easy to use. The simple nature makes it easy to navigate and operate.

On the software side, the Flashprint slicer is easy to use. However, it still falls short of the quality offered by third-party slicers.

All the connectivity options on the printer work well, especially the WIfi connection. You can even use some cloud-based slicers to prepare your pints before sending them to the printer.

On the print side, the Adventurer offers pretty good print quality considering the price and other features. However, users will find themselves limited by the small build space it offers.

Pros of the Flashforge Creator Pro

  • Premium compact build
  • Enclosed build space
  • Remote print monitoring
  • Dual extruder setup gives more printing abilities
  • Fairly low maintenance 3D printer
  • Wi-Fi connectivity
  • Aluminum alloy prevents warping and is able to withstand high temperatures

Cons of the Flashforge Creator Pro

  • Operation can be noisy
  • Small build space
  • The build plate is non-removable
  • Limited software functionality

Final Thoughts

The Flashforge Adventurer 3 is more than just a beginner-friendly 3D printer. It also offers many premium features that you would be hard-pressed to found in similarly priced printers.

If you can get past the small build space, then I’d highly recommend this printer for beginners and educators.

Get yourself the Flashforge Adventurer 3 from Amazon today.

Tips For 3D Printing Toys For Children

3D printing toys for kids with kids can be a fun activity. It is a way for them to express and breathe life into their creativity. It can also teach them STEM skills in a fun way.

To get the best out of 3D printing activities, there are some tips and tricks to avoid common issues. I’ve compiled some of them to help you have the best experience.

Practice Proper Safety Techniques

3D printers are machines with a lot of moving parts and hot components. Their setup can easily cause accidents. So to avoid this, you can follow these safety tips:

  1. Print or buy guards and covers for all the hot moving parts on the printer.
  2. Keep underage children away from open build space printers.
  3. Do not leave printers without thermal runaway protection unattended on long prints.
  4. For younger children, avoid printing parts that are small or that can easily break

Print The Toys With A High Infill Rate

Printing the toys with a high infill rate gives them more solidity and toughness. Hollow toys can easily break or get damaged easily. But toys printed with a high infill rate are stronger and resist damage better.

Use Food Safe Filaments When Necessary

Some toys, like maybe teapots or kitchen sets, can find food applications. Others that aren’t even food-related may still find their way into the mouths of minors. That’s why it’s crucial to use food-safe filaments when necessary to avoid health issues.

Recent Posts